standard stencil opening for qfn

Here you can find discussions pertaining to finding or creating Symbols and package footprints. Anything to do with Schematic or layout parts will be placed in this discussion.

standard stencil opening for qfn

    by vivian_dao » Sun Sep 23, 2012 11:32 am

yes, i would like to know what is industrial standard stencil opening vs. recommendation stencil opening for qfn
Posts: 1
Joined: Sun Sep 23, 2012 11:28 am

Re: standard stencil opening for qfn

    by Sal Hernandez » Mon Sep 24, 2012 11:54 am

The manufacturer's data sheet should provide you with the solder paste layout and dimensions. In general the solder paste pads for should be the same size (or slightly smaller) and shape as the physical pads you will be soldering to. The only exception is the center pad which should have a crosshatch configuration. It is best to review the data sheet for the part you are going to use but here is one example that you may find helpful.

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Return to “Schematic and Layout Parts (Libraries)”

Who is online

Users browsing this forum: No registered users and 0 guests