Symbol Original Name

Discuss PCB123. Talk to the influencers. Be an influencer.


Symbol Original Name

    by ideaman4u » Fri Apr 04, 2014 2:46 pm

I note on the .BOM a column titled Original Name. I had not noticed when modifying my schematic that apparently an R is prefixed to the symbol name under some conditions. Can anyone explain when the R is prefixed (under what conditions)?
ideaman4u
 
Posts: 31
Joined: Tue Oct 25, 2011 12:00 am

Re: Symbol Original Name

    by Sal Hernandez » Tue Apr 08, 2014 11:56 am

Would you please send your .123 file to support@sunstone.com for review?
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Symbol Original Name

    by Sal Hernandez » Tue Apr 15, 2014 8:52 am

This happens when the reference designator is changed from the Edit Component dialog or from a netlist import, a property called “ORIGNAME” is added to the component which is referenced in the BOM export.

This does not happen when the reference designator is changed from the context menu command.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Symbol Original Name

    by kathi » Wed Nov 05, 2014 8:27 pm

We do still use interchange the 150 and 170 Tg material. Both materials are lead-free options. If you must specify the material to be used you should order through our Sunstone PCB Full Feature service with fabrication notes stating the Tg you need. We have not had any issues interchanging these materials for RoHS boards.
kathi
kathi
 
Posts: 1
Joined: Wed Nov 05, 2014 8:18 pm




Return to “General PCB123 Discussion”

Who is online

Users browsing this forum: No registered users and 3 guests

cron