Increasing thermal relief widths

[Chuan Liu]

You can run a wider trace from the Pin to the copper pour on top the thermal relief line. This way will increase width of the thermal relief.

Select the “free style routing” on top to run trace, then start from the center of the Pin draw a trace to the copper pour.

Step11.JPG (12.29 KiB) Viewed 5964 times

Select the “Select an object” tool, then highlight the trace you just draw, right click and select properties.

Step2.JPG (20.42 KiB) Viewed 6983 times

Step31.JPG (14.97 KiB) Viewed 5964 times