Pad restrictions

Here you can find discussions pertaining to finding or creating Symbols and package footprints. Anything to do with Schematic or layout parts will be placed in this discussion.


Pad restrictions

    by mike4viper » Tue Jul 19, 2016 10:24 am

Is there a 1" restriction on the pad width/height? I'm building a part that has a 22.35mm x 28.70mm ground pad. When a attempt to make the surface pad with those dimensions I get the error "Please enter a pad height greater than zero and less than 1 inch". What is the proposed way around this?

Thank you,
Mike
mike4viper
 
Posts: 10
Joined: Wed Nov 16, 2011 12:00 am

Re: Pad restrictions

    by mike4viper » Wed Jul 20, 2016 7:40 am

istvanb, thanks for the response. I'm actually trying to build a part and I need a 22.35mm x 28.70mm exposed pad for the ground pin on the part. I am not aware of anyway to do a copper pour that would be exposed for soldering the part on.
mike4viper
 
Posts: 10
Joined: Wed Nov 16, 2011 12:00 am

Re: Pad restrictions

    by mike4viper » Tue Jul 26, 2016 9:05 am

Any help on making a 22.35mm x 28.70mm exposed ground pad would be greatly appreciated. Thank you.
mike4viper
 
Posts: 10
Joined: Wed Nov 16, 2011 12:00 am

Re: Pad restrictions

    by Robert Ohanesian » Wed Aug 03, 2016 3:41 pm

Let us know if this worked for you. If not we have a few other things you can try out. You can always email in to support@sunstone.com and let us know if you experience any difficulties.
Regards,

Robert Ohanesian
Customer Support
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Robert Ohanesian
 
Posts: 49
Joined: Thu Oct 16, 2014 10:18 am




Return to “Schematic and Layout Parts (Libraries)”

Who is online

Users browsing this forum: No registered users and 3 guests

cron