Spacing / Clearance question

Do you have a question on how to simplify the PCB manufacturing process? Ask our experts.


Spacing / Clearance question

    by DanBrunermer » Thu Apr 14, 2016 12:21 pm

Hi,

What's the minimum spacing between a silkscreen line and an SMT pad?

Thanks, Dan B.
DanBrunermer
 
Posts: 4
Joined: Tue Oct 04, 2011 12:00 am

Re: Spacing / Clearance question

    by Matt Rhodes » Thu May 05, 2016 8:19 am

Hello Dan,

Officially there is no minimum spacing between the silkscreen line and any exposed copper. As long as you remember to leave the Silkscreen Clip option turned on (this is default on for every quote form) you can have the silkscreen draw right over the top. Then we will worry about cutting that silkscreen away from the drawing so you receive a clean and solder able service.

If in the event you choose not to have this option turned on then I wouldn't have the silkscreen drawn any further towards your pad than the outer edge of your soldermask opening for said pad. With a draw back of about 5mils. The 5mils added will account for the soldermask registration tolerance.
Matt Rhodes
Customer Support Lead
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198 x336
Fax: 503-829-5482
Matt Rhodes
 
Posts: 1
Joined: Mon Oct 10, 2011 12:00 am

Re: Spacing / Clearance question

    by grosirbrosd » Wed Jun 08, 2016 2:30 am

Thank Matt. Very appreciate much help.
grosirbrosd
 
Posts: 1
Joined: Wed Jun 08, 2016 2:18 am

Re: Spacing / Clearance question

    by Robert Ohanesian » Fri Jun 17, 2016 8:23 am

Hello grosirbrosd,

If you have any questions similar to this one or need any help please let us know. You can submit something here or email us at support@sunstone.com.
Regards,

Robert Ohanesian
Customer Support
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Robert Ohanesian
 
Posts: 49
Joined: Thu Oct 16, 2014 10:18 am




Return to “PCB Manufacturing Topics”

Who is online

Users browsing this forum: No registered users and 3 guests

cron