How to fix DRC "Pad to pad" error.

Discuss PCB123. Talk to the influencers. Be an influencer.

How to fix DRC "Pad to pad" error.

    by Chuan Liu » Tue Aug 21, 2012 11:16 am

PCb123's default minimun trace/space is 0.007". But if your trace's net properties set the space to other bigger number for spacing, you might get DRC "Pad to Pad" error.
Pad to pad.JPG
Pad to pad.JPG (41.19 KiB) Viewed 5417 times
This DRC error is because the Net spacing was set to 0.030". To correct this please mouse over Pin 4 's yellow ratsnest line and right click “properties”.

Then change the Spacing to something like 0.007”.
Net spacing.JPG
Net spacing.JPG (22.64 KiB) Viewed 5417 times
Chuan Liu
Posts: 22
Joined: Fri Sep 23, 2011 12:00 am

Return to “General PCB123 Discussion”

Who is online

Users browsing this forum: No registered users and 0 guests