Breaking schematic into pages

PCB123 Schematic Questions and Discussion.


Breaking schematic into pages

    by Railroadnut » Mon Jun 18, 2012 8:06 am

I have completed a design and want to print out the schematic. Unfortantly, I made the drawing too big to print with the printer I have access to. I tried to add pages and copy parts of the schematic to it, BUT it then proceded to unroute that section. Does anybody know a way to break up the schematic without unrouting the board? I guess I could copy the design to a new file and break up the schematic, then ignore the unrouted layout it creates, but it would nice to keep just one file.
Railroadnut
 
Posts: 9
Joined: Tue Sep 20, 2011 12:00 am

Re: Breaking schematic into pages

    by Sal Hernandez » Tue Jun 19, 2012 2:29 pm

There really isn't a way to cut a section out of the schematic without losing some routing. What you can do is break up the schematic into two sections using ports. Then go back to the layout to make sure all of the routing is still there. You should be able to cut one of the whole schematic sections and paste onto a new page without losing any routing.

For more information on using our PCB CAD Software please visit the PCB123 support section.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Breaking schematic into pages

    by Sal Hernandez » Mon Jan 28, 2013 12:03 pm

You cannot add a symbol to the schematic unless it is paired with a matching footprint. The software is designed to represent parts that are on a printed circuit board only.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am




Return to “PCB123 Schematic”

Who is online

Users browsing this forum: No registered users and 0 guests

cron