part search

Here you can find discussions pertaining to finding or creating Symbols and package footprints. Anything to do with Schematic or layout parts will be placed in this discussion.


part search

    by japper » Tue Aug 05, 2014 6:13 am

I am using PCB123 V5.0.3.1 and attempting to find some parts in the PCB123 libraries. The PCB123_V5 manual (page 88) shows a part search screen but doesn't show to get to this screen in the software...

Also, are most of the Digikey parts available or is there a list of which ones are available either through sunstone or some online PCB123 user group? I would prefer not to spend time making these if they are available somewhere.

The Part Taxonomy section seems limited in parts available and I am wondering if others are available somewhere...

Thanks
japper
 
Posts: 1
Joined: Wed Nov 21, 2012 6:02 am

Re: part search

    by Sal Hernandez » Tue Aug 05, 2014 8:58 am

All of the parts we have are provided with PCB123. At this time we don't have a location for parts sharing, but I can create a forum thread to support this if the community is open to sharing.

It is best to search for package types when looking for parts in the PCB123 libraries. You have two options for selecting parts from the layout you can go to Insert and select Add Footprint or Add Component. From the schematic select Insert > Add Part. This is the window shown in the user's guide. Add Part in schematic and Add Component are the same form.

Try searching for the part type ie dip, soic, qfn then add additional parameters to the string to narrow the search. If you can't find the part go directly to the layout and search the footprint libraries by selecting Design > Edit Footprint for the package you need. If you find one that matches or is close you can use it or edit it to meet your need. Once you have the part updated you can place it directly on the layout or pair it with a symbol to add to the schematic.

This forum post explains the parts creation process in detail.

updated-pcb123-parts-creation-process-t181.html
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am




Return to “Schematic and Layout Parts (Libraries)”

Who is online

Users browsing this forum: No registered users and 1 guest

cron