Can a layout Polygon be a Pin?

Here you can find discussions pertaining to finding or creating Symbols and package footprints. Anything to do with Schematic or layout parts will be placed in this discussion.


Re: Can a layout Polygon be a Pin?

    by Sal Hernandez » Tue Apr 15, 2014 8:59 am

At this point, no, you can't set a property to identify a polygon as a pin. I have already submitted an enhancement request to allow creating custom shaped pads. I will add your feedback to the request.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Can a layout Polygon be a Pin?

    by dooori » Sat Apr 04, 2015 2:19 pm

I selected a LED (598-8310 107F) using Add Part. The schematic symbol looked rather strange, so I went to the Symbol Editor and loaded it. I found an "*" shown under the Section along with a repeat of the pin number. Anybody know what this means and how to use it (assuming one would wish to use it)?
dolii
dooori
 
Posts: 1
Joined: Sat Apr 04, 2015 1:55 pm

Re: Can a layout Polygon be a Pin?

    by Robert Ohanesian » Thu Dec 31, 2015 11:26 am

If you take a look through the manual, you'll find out that the little star "*" next to a part means that it has been edited. You can get rid of that star if you revert back to the original part.
Regards,

Robert Ohanesian
Customer Support
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Robert Ohanesian
 
Posts: 49
Joined: Thu Oct 16, 2014 10:18 am

Re: Can a layout Polygon be a Pin?

    by Robert Ohanesian » Mon Mar 14, 2016 8:40 am

Thank you! We always appreciate feedback from our customers. If you have any questions or any more comments please feel free to send them to our support email.

support@sunstone.com
Regards,

Robert Ohanesian
Customer Support
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Robert Ohanesian
 
Posts: 49
Joined: Thu Oct 16, 2014 10:18 am




Return to “Schematic and Layout Parts (Libraries)”

Who is online

Users browsing this forum: No registered users and 4 guests