Placing and Editing ports

PCB123 Schematic Questions and Discussion.


Placing and Editing ports

    by Sal Hernandez » Mon May 14, 2012 9:30 am

You will need to use the various ports to add and change nets assigned to wires. You can use off page ports to represent connections to other pages and the global port for same page connections that are not power or ground.

You may want to name the port before placing it.
1. Select the desired port. Select Insert Add Port or use the Add Port tool bar shown below.
select port.JPG
select port.JPG (21.26 KiB) Viewed 130633 times
2. After you select the desired port, look to the top section of the Edit Panel. There enter the net name you would like to use in the Net Name(s) section. If you do not see the Edit Panel select View Toolbars Edit Panel.
Modify net name.JPG
Modify net name.JPG (35.31 KiB) Viewed 130633 times
3. Finally, you can place the port. If you have already placed the port and must rename it, you should first left click on the port to select it. Now you can edit the Net Name in the top section of the Edit Panel. Left click in the schematic window to place the newly renamed port.

Need more help with your PCB Cad Design Project?

Check out

PCB123 Manuals
PCB123 Tutorials
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Placing and Editing ports

    by Sal Hernandez » Mon Dec 22, 2014 9:45 am

Thanks for the feedback. I can see some of the issues you reported. If you need to edit a net name from the Net Assignment field you can use the keyboard left or right arrow keys to place the cursor in the field to edit the text. I will pass along your feedback to our developer.

The right click context menu item Rename net will take a complete or subset of a net and change the nets name. This option only allows you to create new nets. It will not allow you to enter in a netname that already exists on your design.

I seem to have many items under my last used nets list. I did notice that after I used new net names I did not see them in my list. After I switched tools and returned to adding ports. I will report this issue to our developer.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Placing and Editing ports

    by katy1163 » Tue Mar 24, 2015 2:06 pm

I am using Version 5.2.0.0 and I can not see the Net Assignment portion of the Edit Panel. Is it located somewhere else in this version?
katy1163
 
Posts: 1
Joined: Tue Mar 24, 2015 2:04 pm

Re: Placing and Editing ports

    by Sal Hernandez » Tue May 19, 2015 7:33 am

You can only see the Net Assignment section when you have the add port tool selected or when you have a port selected. The Port Attributes section contains the Net Assignment field and will be at the top of the Edit Panel as shown below.
net assignment.JPG
net assignment.JPG (22.17 KiB) Viewed 128409 times
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Placing and Editing ports

    by dawn » Mon Feb 18, 2019 9:45 am

:D :D :D
dawn
 
Posts: 1
Joined: Mon Feb 18, 2019 9:36 am




Return to “PCB123 Schematic”

Who is online

Users browsing this forum: No registered users and 3 guests