Removing wires

PCB123 Schematic Questions and Discussion.


Removing wires

    by ideaman4u » Wed Mar 12, 2014 2:00 pm

How do you select a wire between two closely adjacent pins on a component? Seems like I just snap back and forth to each pin without ever selecting the wire. I find I have to remove and reinstall such a component to delete wires. Is there something I am missing?
ideaman4u
 
Posts: 31
Joined: Tue Oct 25, 2011 12:00 am

Re: Removing wires

    by Sal Hernandez » Fri Sep 05, 2014 2:10 pm

If you have two adjacent pins that are connected on the schematic and you want to break the connection you can go to the layout footprint right click on the pin you want to disconnect and select Disconnect pin from net. This schematic bug has been reported to our developer.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Removing wires

    by ideaman4u » Wed Dec 02, 2015 1:38 pm

This one still seems to be with us. But now, with 5.1, Sal's suggestion does not seem to work. In case I didn't understand, Sal, can you explain exactly what you meant?
ideaman4u
 
Posts: 31
Joined: Tue Oct 25, 2011 12:00 am

Re: Removing wires

    by ideaman4u » Thu Dec 03, 2015 1:07 pm

Whoops! Open mouth, insert foot. My apologies to Sal! I misunderstood his instructions. One goes to Layout, then to the component then right click on the _PIN_ desired, which brings up a menu with the choice to disconnect the pin from the net. This then reverse propagates to the Schematic layout and, voila, the pin is disconnected.
ideaman4u
 
Posts: 31
Joined: Tue Oct 25, 2011 12:00 am

Re: Removing wires

    by Robert Ohanesian » Thu Dec 31, 2015 11:23 am

Hopefully you were able to get everything working correctly from Sal's post. If not please let us know at support@sunstone.com. Or give us a call here and someone will gladly help you out!
Regards,

Robert Ohanesian
Customer Support
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Robert Ohanesian
 
Posts: 49
Joined: Thu Oct 16, 2014 10:18 am




Return to “PCB123 Schematic”

Who is online

Users browsing this forum: No registered users and 1 guest