I just started using PCB 123 recently for a project i'm doing, but due to my inexperience I have gotten a bit stuck. So I want to create a PCB with about 50 card edge contacts. I have found a (seemingly) suitable connector:
http://solutions.3m.com/wps/portal/3M/e ... KXTX6MZBbl
But I'm having trouble interpreting the data sheet for the connector and getting necessary info about the layout of the mating card (my PCB). i.e. how far apart should the contacts be spaced, what are the dimensions of each contact, how far should the contacts be from the edge of the board, and how many contacts should be on each side of the gap in the board.
Any help would be greatly appreciated.