tips to setup & order for wide trace/space

Discuss PCB123. Talk to the influencers. Be an influencer.

tips to setup & order for wide trace/space

    by Bob Tise » Thu Mar 02, 2017 8:16 am

Problem; you are trying to order a 3 oz copper board but the order form keeps telling you your trace/space is only 6mils.
This is not necessarily because you didn't route your board with big fat traces and sufficient spacing to keep from shorting, it is because your default setup has not bee updated to reflect your desired result.
In order to change this, you will need to do a couple of things.
Change net trace width to your desired minimum, default is .006in.
Change line width to that same desired minimum.
Click on the Routing and Spacing Rules tab in the User Preferences popup.
Change All Layers spacing to your new desired minimum spacing, default is 0.006in
Once this is done, you will not be able to route any wires smaller than whatever you have defined as your desired minimum trace/space rule.
Even more importantly, you will have the ability to order your 3oz copper board with minimum trace/space to support that, your pricing will reflect that wider trace/space as well.
PCB123 will not currently allow heavy copper weight for multi-layer boards, but your routing rules will support the heavier copper.
The workaround for this is to log into your sunstone account, order the board using the onequote order form instead of going through the pcb123 order process, then just upload your pcb123 file to the quote/order.
Bob Tise
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Bob Tise
Posts: 9
Joined: Thu Sep 01, 2011 12:00 am

Return to “General PCB123 Discussion”

Who is online

Users browsing this forum: No registered users and 3 guests