Convert PCB123 v3 to v5

Discuss PCB123. Talk to the influencers. Be an influencer.


Re: Convert PCB123 v3 to v5

    by Sal Hernandez » Fri Sep 05, 2014 1:20 pm

The files from v3 should open in v5 without issues, but I don't have any known v3 files to test. Please email you 123 file to support@sunstone.com so I can check the version and see if there are any issues moving from 3 to 5.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Convert PCB123 v3 to v5

    by Sal Hernandez » Thu Sep 11, 2014 6:56 am

The provided file is a v2 design. This version has a separate schematic file with a .epc file extension. The v2 schematic file cannot be opened in any later version of PCB123, nor can it be converted to work with v5. You can continue to open this design in v2 and update it. When you place your order you will need to use v5. Make sure to keep a back up of your v2 designs. Once you save the 123 file in v5 you will no longer be able to open it in v2.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Convert PCB123 v3 to v5

    by Sal Hernandez » Thu Sep 11, 2014 9:17 am

v2 should run on Win 7 and 8. What happens when you try to run PCB123 v2?
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Convert PCB123 v3 to v5

    by Sal Hernandez » Thu Sep 11, 2014 10:55 am

Right click on the desktop shortcut for PCB123 and select Properties. Go to the Compatibility tab. Select the box next to Run this program in compatibility mode for. Select Windows XP (Service Pack 3) from the drop down menu and select OK.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am

Re: Convert PCB123 v3 to v5

    by Sal Hernandez » Thu Sep 11, 2014 11:36 am

I can't imagine why that would happen. If you don't have service pack 3 maybe try service pack 2.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
Sal Hernandez
 
Posts: 381
Joined: Wed Jul 06, 2011 12:00 am




Return to “General PCB123 Discussion”

Who is online

Users browsing this forum: No registered users and 5 guests