Page 1 of 1

Copied footprints do not paste in correct ref des order.

PostPosted: Mon Dec 09, 2013 7:00 am
by Sal Hernandez
At this time using copy and paste to copy a group of footprints or symbols will not paste the objects with the reference designators in the same order as the original set.

Example: if there are 8 diodes, D1 thru D8 that are copied-pasted they should be sequentially numbered D9 thru D16. The software currently randomly renumbers the string.

I have reported this issue to our developer and we will fix this in the future.

You can right click on a footprint and select properties. On the Component tab you can change the reference designator.