EAGLE Software - Generate Gerber Files
PostPosted: Mon Jul 22, 2013 7:50 am
Hello,
Here at Sunstone, we have CAM jobs which contain preselected object layers to generate Gerber files needed for our products using EAGLE software. But in case you do not have the cam jobs, or wish to generate the Gerber files using the default CAM jobs in EAGLE, we have written instructions here that are easy to read and can help guide you through the file generation.
If you have any questions or suggestions, please reply to this post and we will do our best to assist you.
For more information on the Object Layer Selections or Generating the NC Drill file, please see links below.
Generating NC Drill using EAGLE Software: post87.html?hilit=EAGLEdrill#p87
EAGLE Native File Conversion & Object Layers: post427.html?hilit=eagle#p427
Here at Sunstone, we have CAM jobs which contain preselected object layers to generate Gerber files needed for our products using EAGLE software. But in case you do not have the cam jobs, or wish to generate the Gerber files using the default CAM jobs in EAGLE, we have written instructions here that are easy to read and can help guide you through the file generation.
If you have any questions or suggestions, please reply to this post and we will do our best to assist you.
For more information on the Object Layer Selections or Generating the NC Drill file, please see links below.
Generating NC Drill using EAGLE Software: post87.html?hilit=EAGLEdrill#p87
EAGLE Native File Conversion & Object Layers: post427.html?hilit=eagle#p427