I sent a PDF copy in your direction via support@sunstone.com
If it needs to be sent another way just let me know.
RH

Why is it that printing a schematic results in the borders on the top and right sides missing?
Print function leaves a lot to be desired!

I am in the process of creating an LVDS cable to connector adapter board and need to make the traces of equal length due to its high speed. Is there an easy way to do this?

Cockpit error. I was looking in the wrong area. Should of been lokking in the "all users" directory. Looks like all is kosher now!
Thanks much for the help.

OK, I found where it goes. So I copied from the XP machine to the Windows 7 machine. There are no components there that were created by me in the old machine in the new one.
I have a limited time to get things transfered before the hard drive in the old machine gets re-formatted.

The powers that be here at work took away my old machine and replaced it with a new one. The old one is XP the new one is Windows 7. How can I get my parts libraries moved? I would really like to not need to rebuild them if at all possible.

In version 16 this can be done. Not version 19 creating and aligning footprint pads/pins 1) for the sake of example, place 5 pins in somewhat random alignment below the center point. 2) do the same only above the center point. 3) using mouse, select the lower 5 pins. 4) right click on one of the pin...

I would like to add to the list:

Creating footprints, at one time a person could move a block of pads and/or holes to line up on either the x or y axis all in one fell swoop. this made it easier to create footprints. now each has to be done one at a time.