Reusing parts

Discuss PCB123. Talk to the influencers. Be an influencer.

Moderator: Sunstone Moderators



Reusing parts

Postby Dudley » Thu May 09, 2013 1:00 pm

I am an infrequent user of PCB123 (or Designer of PCBs for that matter)

When I open an old design today, all parts are still there (that has not always been the case). I use mostly custom or customized parts, but between designs I change computer, OS or PCB123 version.

This means that my custom taxonomy families are lost.

Quickly recreating a custom taxonomy family using parts from an older design or from any of the other families for my next design is difficult, if not impossible. I can edit footprints and save them to my new .slb library, but schematic and taxonomy information are lost. (I can copy them on paper and re-enter them which is a painful process).

Could the software work as follows?:
Opening an existing project 'xyz.123' will create a custom taxonomy family 'xyz' (with the .tax, .sym and .slb files to support them). Parts from any family can be copied to another, so before starting a new project, a new custom taxonomy family can be created containing all the parts needed for the new design.

Another helpful feature would be if custom libraries (.tax, .sym and .slb) files could be stored in any location other than just the appdata directory. This way, managing, reusing taxonomy and parts on different computers (even at the sam time) becomes more manageable. I lost my custom files more than once due to a crashed or new PC.

Another great feature would be to be able to generate and import PCB objects, a group of components routed together. Example, a microprocessor with 8 identical inputs. By creating one object 'input' (screw terminal, optocoupler, LED, rectifier diodes), the object just needs to be imported 8 times and placed on the project where it can be connected to the microprocessor terminals. If you change a component on object 'input' all eight inputs of the processor change as well. The next design, with a different microprocessor of only 4 inputs, object 'input' can be reused. The object is identical to a part (footprint, schematic and taxonomy), but it has its pins routed. The creation of an object would be identical to the creation of a complete PCB.
User avatar
Dudley
 
Posts: 2
Joined: Thu Sep 15, 2011 12:00 am

Re: Reusing parts

Postby Sal Hernandez » Fri May 10, 2013 6:33 am

Thanks for your post.

I will submit your feedback to our development team. To carry parts over to a new computer you need to copy you Lib folder from your old computer to the new computer. This way you have all of the information from your previous PCB123 installation.

You can find PCB123 file storage paths here

The request to customize the library location is one that we are considering for a future licensed version that supports a multi-user environment.

PCB123 already allows you to store groups of objects as templates. Design the group of parts with routing and save the configuration as a template. When you are working on your layout right click on the back ground and select load selection to import the saved template. This will retain layout parts, routing, and placement, but schematic information will be automatically recreated on the sync page. You may see a copy of the mechanical layer on the layout import as well. Select Deign > Tools > Generate Mechanical Drawing to update the mechanical layer and remove the duplicated info.

Please feel free to contact customer support if you have any questions.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
User avatar
Sal Hernandez
 
Posts: 396
Joined: Wed Jul 06, 2011 12:00 am




Return to General PCB123 Discussion

Who is online

Users browsing this forum: Hemsbugs, wetTietwob and 1 guest

cron