QFN Custom Stencil Layers - EAGLE

Includes information regarding protoyping, technical questions, company news, and input about our products.

Moderator: Sunstone Moderators



QFN Custom Stencil Layers - EAGLE

Postby Nolan Johnson » Mon May 14, 2012 9:30 am

Duane Benson over at Screaming Circuits has a great blog post from Nov 14, 2011, on creating stencil opening for QFN parts. Here's the link to the actual post. Duane's post talks about EAGLE specifically, but the general idea can be used for other CAD tools as well. Nevertheless, it's worth quoting a couple key ideas here; they bear repeating: 1. In Eagle, open the part that you want to customize in the Eagle Library editor. 2. Open up the package for that component. 3. Now, select "i" on the left side and click on the center pad. You might need to turn off the "tcream" layer in order to select the pad. 4. In the Properties dialog box, un-check the check box for cream. That will get rid of the standard stencil layer. 5. Now you can use the rectangle tool to add in stencil cut-outs as you want them. Make sure you set the layer for the rectangle to be "tcream" and remember that you are drawing the cut-outs of the stencil, not the blocked part. And that's it, really. Here at Sunstone, we highly recommend the Screaming Circuits blog.
Nolan Johnson
CAD/EDA Manager
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Nolan Johnson
 
Posts: 32
Joined: Thu Sep 01, 2011 12:00 am



Return to Products and Services

Who is online

Users browsing this forum: wansd8y4bb1 and 0 guests

cron