PADS Software – Gerber & NC Drill File Output

Includes information regarding protoyping, technical questions, company news, and input about our products.

Moderator: Sunstone Moderators



PADS Software – Gerber & NC Drill File Output

Postby Terri Miller » Wed May 30, 2012 2:52 pm

Hello,

To generate CAM output from PADS software, open the .pcb in PADS and then Go to File > CAM:

The ‘Define CAM Documents’ window will open and here you can click on the various CAM documents to choose the manufacturing outputs for your project. Choose ‘Run’ to generate the selected files.

To confirm that the Gerber files are in the preferred Extended (RS-274X) format, with Define CAM Documents window open, to to Edit and the Edit Document window will open. Choose Device Set up at the bottom of the window; From the Photo Plotter Setup window, choose Advanced. The Photo Plotter Advanced Setup window will open, and here you can choose the output format, etc. We prefer the RS-274X Extended Gerber format for our PCB Quick Turn products since the sizes and shapes of objects in the design are embedded in the file and there is a smaller risk of incorrect information in the final file set.

To generate the NC Drill only, from the same window (Define CAM Documents) Choose ‘NC Drill Drawing’… Summary will describe the selections for the current document chosen. For instance, when you choose NC Drill Drawing, the holes and vias will be described in the Summary section. ~ Choose Run to generate the drill file.

I have attached a quick reference pdf for generating your files. I have also attached screenshots of windows referenced to confirm gerber format.

If you have questions or suggestions about this post, please reply and we will do our best to assist you!
Attachments
Photo Plotter Advanced Setup.jpg
PADs Photo Plotter Advanced Setup
Photo Plotter Advanced Setup.jpg (48.79 KiB) Viewed 10163 times
Photo Plotter Setup.jpg
PADs Photo Plotter Setup
Photo Plotter Setup.jpg (41.87 KiB) Viewed 10163 times
Edit Document.jpg
PADs Edit Document
Edit Document.jpg (63.61 KiB) Viewed 10163 times
PADS Gerber & NC Drill Output_NEW.pdf
PADs - Gerber & NC Drill File Output
(403.9 KiB) Downloaded 1295 times
Regards,

Terri Miller
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Terri Miller
 
Posts: 38
Joined: Thu Sep 01, 2011 12:00 am



Return to Products and Services

Who is online

Users browsing this forum: No registered users and 0 guests