Net selection between connector pins.

Here you can find discussions pertaining to finding or creating Symbols and package footprints. Anything to do with Schematic or layout parts will be placed in this discussion.

Moderator: Sunstone Moderators

Net selection between connector pins.

Postby mgustin » Tue May 27, 2014 2:09 pm

I have a net between two adjacent pins on a connector symbol that I want to delete. I am not able to select the net to delete the net. I have refreshed the screen to insure the net is real and not an artifact.

I have attached a screen shot of the net between the two pins and I circled it.

Is there a filter function that I can apply so I can only select the net and not get the component?

Can anyone suggest how to delete the net? When I select the connector and move it the little net between the pins moves with the connector.

Any help will be greatly appreciated.
Net between two pins.JPG
Net between two pins.JPG (50.53 KiB) Viewed 2147 times
Posts: 1
Joined: Wed May 07, 2014 9:54 am

Re: Net selection between connector pins.

Postby Sal Hernandez » Wed May 28, 2014 2:26 pm

Go to the footprint, right click on one of the pins and select disconnect pin from net.

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
User avatar
Sal Hernandez
Posts: 396
Joined: Wed Jul 06, 2011 12:00 am

Return to Schematic and Layout Parts (Libraries)

Who is online

Users browsing this forum: No registered users and 1 guest