How to make a round PCB with (one) flat side.

Discuss PCB123. Talk to the influencers. Be an influencer.

Moderator: Sunstone Moderators



How to make a round PCB with (one) flat side.

Postby Sal Hernandez » Mon Feb 18, 2013 9:17 am

This cannot be done with the round board template.

Start with a square board outline with the sides equal to the diameter of your round board. I recommend centering the board outline around the origin. Mouse over a corner of the board outline, right click and select convert corner to arc a. Enter in the radius of your circle to create the arc. Repeat these steps with each remaining corner.

To create the flat side: Mouse over the side you want to flatten and press the 'd' key on your keyboard. This will delete corners and will allow you to flatten the outline. You may want to place a temporary line designating where you want the flat portion to exist to use a reference point so you don't remove to much of the rounded outline.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
User avatar
Sal Hernandez
 
Posts: 396
Joined: Wed Jul 06, 2011 12:00 am



Return to General PCB123 Discussion

Who is online

Users browsing this forum: No registered users and 2 guests