EAGLE, Native File Conversion & Object Layers

Includes information regarding protoyping, technical questions, company news, and input about our products.

Moderator: Sunstone Moderators



EAGLE, Native File Conversion & Object Layers

Postby Terri Miller » Sun Jun 17, 2012 11:24 pm

Hello,

Whether you are generating your own gerber files from EAGLE software or having Sunstone do your file conversion for you, there are steps you must know to generate your files and layer information that you must provide in order to ensure the accuracy of the conversion.

One way to generate your gerber files using EAGLE software is to run the CAM Processor. Sunstone Circuits also offers PCB Native File Conversion if you would like for us to convert the file for you.

When you choose a CAM job and open, you must select Object Layers to output to a device or file. Whatever is required for your design. And you would also have to provide this information (object layer numbers) for your Native file conversion during the order process at Sunstone (See Sunstone-EAGLE Layer Mapping.jpg attachment).

For further information on Object Layers within EAGLE, see attachment called EAGLE & Object LYR Info.jpg; this table contains the layer numbers, names, extensions (both default in EAGLE and what Sunstone uses internally) and also layer definitions.

For an example of choosing the object layers within EAGLE software, see EAGLE Object Lyrs.JPG; the Silkscreen for the Top Side in this example consists of Object Layers 21 (tPlace) & 25 (tNames). This is where you define which layers are required for your design. During the order process, you will be prompted to include these Object Layer numbers for each layer of an EAGLE Native File Conversion OR, you will need to choose these at the time that you convert your EAGLE .brd file to gerbers.

If you have any questions, comments, or suggestions about this post, please reply and we will do our best to assist you!

Thank you!
Attachments
Sunstone-EAGLE Layer Mapping.jpg
Sunstone EAGLE Object Layer Mapping
Sunstone-EAGLE Layer Mapping.jpg (50.66 KiB) Viewed 3038 times
EAGLE Object Lyrs_NEW POST.JPG
EAGLE & Object Layers Example Silkscreen
EAGLE Object Lyrs_NEW POST.JPG (66.71 KiB) Viewed 3038 times
EAGLE & Object LYR Info.jpg
EAGLE & Object Layers
EAGLE & Object LYR Info.jpg (31.74 KiB) Viewed 3038 times
Regards,

Terri Miller
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Terri Miller
 
Posts: 38
Joined: Thu Sep 01, 2011 12:00 am

Re: EAGLE, Native File Conversion & Object Layers

Postby Terri Miller » Mon Jun 25, 2012 9:11 am

Hello,

Here is more information about the Object Layers in EAGLE software. These are from the EAGLE help menu and contain the Object Layer number, the default name of the layer, and the definition of the layer.

Whether you order Sunstone's Native File Conversion or are converting the file yourself, the Object Layer numbers are what you will need to define your layers.

Again, if you have questions or suggestions about this post - just let us know!
Attachments
Predefined EAGLE Layers_b.jpg
Predefined EAGLE Object Layers
Predefined EAGLE Layers_b.jpg (54.21 KiB) Viewed 3014 times
Predefined EAGLE Layers_a.jpg
Predefined EAGLE Object Layers
Predefined EAGLE Layers_a.jpg (58.88 KiB) Viewed 3014 times
Regards,

Terri Miller
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 800-228-8198
Fax: 503-829-6657
Terri Miller
 
Posts: 38
Joined: Thu Sep 01, 2011 12:00 am




Return to Products and Services

Who is online

Users browsing this forum: No registered users and 0 guests

cron