Creating Slots or Cutouts

Discuss PCB123. Talk to the influencers. Be an influencer.

Moderator: Sunstone Moderators



Creating Slots or Cutouts

Postby Sal Hernandez » Mon May 14, 2012 9:30 am

PCB123 v5 now allows up to 4 slots or cutouts. Version 5 includes a cutout tool and new pin properties that allow you to create a slot.

The Cutout tool can be found on the toolbar or by selecting Insert > Add Cutout. This tool allows you to create non-plated round or rectangular cutouts.

Slots are added to a layout using the Add Pin tool.

1. Select the add pin tool.
2. Go to the top section of the Edit Panel.
3. Select the slot check box.
4. Set the properties for your slot.
5. Add the slot to your layout.

If you already have a pin on your layout and want to convert it to a slot you can right click on the pin and select properties. On the pins tab set the appropriate options.

Notches in the board outline that are less than .1" and orders with more than 4 slots and cutouts cannot be ordered through the PCB123 service. Please go to the http://www.sunstone.com website to place your order using our Full Feature service.

If you have additional routing requirements and are ordering through the Full Feature or Custom Quote service feel free to include additional notes describing the desired routing on the Mechanical layer outside the board outline.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
User avatar
Sal Hernandez
 
Posts: 396
Joined: Wed Jul 06, 2011 12:00 am



Return to General PCB123 Discussion

Who is online

Users browsing this forum: No registered users and 0 guests

cron