Creating a filled copper pour.

Discuss PCB123. Talk to the influencers. Be an influencer.

Moderator: Sunstone Moderators



Creating a filled copper pour.

Postby Sal Hernandez » Tue Feb 19, 2013 2:09 pm

Creating a filled copper pour: First select the Draw Polygon tool
DrawPolygon.jpg
DrawPolygon.jpg (1.55 KiB) Viewed 5616 times
. Now you will see the poly properties in the top section of the edit panel. Here you can select the type of polygon, line width of a simple polyline, layer, give the poly a name and select a net. I like to start using a simple polyline to create the shape I want. It is a bit easier for me to see when the shape is complete.

polyProperties.jpg
polyProperties.jpg (23.05 KiB) Viewed 5616 times


Now that you have set the properties for your polygon, you can draw the desired shape. If you have opted to use a filled polygon, the shape will be complete once you return to the starting point with the polygon tool. If you are using a polygon line, once you have completed the shape, return to the select an object tool
SelectObject.jpg
SelectObject.jpg (1.14 KiB) Viewed 5616 times
. Next, right click on the polygon outline and select toggle filled/unfilled. After switching the polygon to filled you will need to assign the polygon to a net if you want a specific net to connect to the fill. You do this by right clicking on the filled polygon then select properties. On the poly properties window select the net from the drop down list and select ok.
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
User avatar
Sal Hernandez
 
Posts: 396
Joined: Wed Jul 06, 2011 12:00 am



Return to General PCB123 Discussion

Who is online

Users browsing this forum: attassaro, Sataseile, Smahwece, Taroattade, TeriCostello87 and 2 guests

cron