Blind Vias?

Discuss PCB123. Talk to the influencers. Be an influencer.

Moderator: Sunstone Moderators



Blind Vias?

Postby Mike... » Mon May 14, 2012 9:30 am

When connecting to an inner plane, is there a way to add vias that don't go all the way through the board? Mike...
Mike...
 
Posts: 1
Joined: Thu Sep 29, 2011 12:00 am

Re:Blind Vias?

Postby Sal Hernandez » Mon May 14, 2012 9:30 am

PCB123 does not support blind or burried vias. All holes that you place on a PCB123 design go all the way through the board. I have had a handlfull of customers design boards in sections then purchase the gerber and drill data for each layout. You can then combine the gerber output into a single multilayer design. You would then have to manually edit the drill tool sizes so they are unique in for each section of the boards. You don't want a tool size 1 in each drill file.

You may need to go with a different tool for a board with blind/burried vias. Eagle supports this type of vias. Remember that if you submit a board with blind/burried vias you will need to submit your design through the Custom Quote service at http://www.sunstone.com for pricing.

http://quoting.sunstone.com/QuoteCustom.aspx
Regards,

Sal Hernandez
Software Support Engineer I
Sunstone Circuits
13626 S. Freeman Road
Mulino, OR 97042
Phone: 503-829-9108 x226
Fax: 503-829-5482
User avatar
Sal Hernandez
 
Posts: 396
Joined: Wed Jul 06, 2011 12:00 am




Return to General PCB123 Discussion

Who is online

Users browsing this forum: antiftics, errormag, ImibeStemi, ReolMerve, Rineirrive, Rozypype, Smahwece, Smastamuff, Taroattade, undihoona, UtitteHage, Zedeencor and 1 guest

cron